Renown Liquid High Gloss Floor Finish - Off White, 4 Gallons per Case

• Liquid High Gloss High Solids Floor Finish - Off White, Renown 4 Case 36.70 Pounds
• High Gloss, High Solids Floor Finish
• Metal interlocked acrylic polymer finish. Super durable formula provides an easily maintained long lasting shine. Self-sealing. Low maintenance. 25% solids.
• RENOWN is a high-solids buffable blend that dries to a bright, high gloss finish. It is made using a concentrated blend of the latest materials available in floor finish chemistry.

Advantages

• This self-levelling formula is easily applied. Its high solid content means fewer coats are necessary to maintain its original high lustre, thus resulting in labour savings.
• Formulated using the finest materials available, its nonslip, high gloss, hard finish is highly resistant to scuffing and black heel marks. To restore to the original gloss, buff with a recommended high-speed burnishing pad.
• Recommended for use on vinyl, vinyl composition, vinyl asbestos, asphalt tile, rubber, and linoleum. Also use on sealed floors of wood, concrete, terrazzo and the so-called no wax floors.

Directions

• INITIAL APPLICATION:
  • 1. Completely strip old floor finish using Re-Move Floor Finish Stripper.
  • 2. Remove stripping solution and rinse floor thoroughly (2 rinses recommended). Allow to dry.
  • 3. Using a clean applicator of choice, apply thin, uniform coat of Renown Floor Finish. Allow each coat to dry thoroughly (normal conditions 20 to 30 minutes). 4 to 6 coats of finish are recommended.
• ROUTINE MAINTENANCE:
  • 1. Dust mop or sweep floor.
  • 2. Damp mop or automatic scrub using Maintain Neutral pH Floor Cleaner.
  • 3. Traffic lanes may be recoated as necessary.
  • 4. Buff or burnish the floor as desired. The use of lustre plus One Step Cleaner/Gloss Enhancer is recommended to condition the floor and extend the time between top scrub and recoating.
• RESTORATIVE MAINTENANCE:
  • 1. Dust mop or sweep floor.
  • 2. Top scrub the floor using APC All Purpose Cleaner at a ratio of 1 to 20 (6 ounces/gallon). Use aggressive enough floor pad to remove the top layer of floor finish.
  • 3. Rinse the floor, making sure it is clean and free of residue. Apply 1 to 2 coats of Renown Floor Finish as directed above.

Caution

• May be harmful if swallowed. May cause irritation to eyes. Keep out of reach of children.

Specification

• Physical Form: Opaque Liquid
• Color: Off White
• Scent: Slight Ammonia
• Specific Gravity: 1.02
• Density: 8.5 lbs. per gallon
• pH As Is: 9.0 +- .3
• Total Solids: 25%
• Weight: 36.70 Pounds

Renown Liquid High Gloss Floor Finish Technical Data Sheet

Renown Liquid High Gloss Floor Finish Safety Data Sheet

Warning- ATTENTION CALIFORNIA RESIDENTS - Cancer and Reproductive Harm-