Integrity High Gloss Extended Wear Floor Finish - Off White, 5 Gallons per Pail

• Liquid High Gloss Extended Wear Floor Finish - Off White, Integrity 5 Gallon Pail
• High Gloss, Extended Wear Floor Finish
• Metal interlocked acrylic polymer finish. Brilliant, high gloss finish provides a durable long lasting shine. Self-sealing. Low maintenance. 18% solids.
• An extremely durable medium solids formulation that offers buffable maintenance and restorability in a dry bright high-gloss finish.

Advantages

• This easily applied, self-levelling formulation is highly resistant to heel and scuff marks. It is readily restored to the original high lustre by either recoating or buffing with a high-speed polisher.
• Formulated with the toughest acrylic polymers, resins, and waxes, insuring a long-lasting transparent finish.
• Use on vinyl, vinyl composition, vinyl asbestos, asphalt tile, and linoleum. Also use on sealed floors of wood, concrete, terrazzo and the so-called no wax floors.

Directions

• Read the entire label before using this product.
• INITIAL APPLICATION:
  • 1. Completely strip old floor finish using Re-Move Floor Finish Stripper.
  • 2. Remove stripping solution and rinse floor thoroughly (2 rinses recommended). Allow to dry.
  • 3. Using a clean applicator of choice, apply thin, uniform coat of Integrity Floor Finish. Allow each coat to dry thoroughly (normal conditions 20 to 30 minutes). 4 to 6 coats of finish are recommended.
• ROUTINE MAINTENANCE:
  • 1. Dust mop or sweep floor.
  • 2. Damp mop or automatic scrub using Maintain Neutral pH Floor Cleaner.
  • 3. Traffic lanes may be recoated as necessary.
  • 4. Buff or burnish the floor as desired. The use of lustre plus One Step Cleaner/Gloss Enhancer is recommended to condition the floor and extended the time between top scrub and recoating.
• RESTORATIVE MAINTENANCE:
  • 1. Dust mop or sweep floor.
  • 2. Top scrub the floor using APC All Purpose Cleaner at a ratio of 1 to 20 (6 ounces/gallon). Use aggressive enough floor pad to remove the top layer of floor finish.
  • 3. Rinse the floor, making sure it is clean and free of residue. Apply 1 to 2 coats of Integrity Floor Finish as directed above.

Caution

• Skin and eye irritant. May be harmful if swallowed. Keep out of reach of children.

Specifications

• Physical Form: Opaque Liquid
• Color: Off White
• Scent: Slight Ammonia
• Specific Gravity: 1.02
• Density: 8.5 lbs. per gallon
• pH As Is: 9.0 +- .3
• pH2%: 11.3
• Total Solids: 18%
• Weight: 46.80 Pounds

Integrity High Gloss Extended Wear Floor Finish Technical Data Sheet

Integrity High Gloss Extended Wear Floor Finish Safety Data Sheet

Warning- ATTENTION CALIFORNIA RESIDENTS - Cancer and Reproductive Harm-