60807-0000005 Total Strip Non-Ammoniated Floor Finish St...

Liquid Non-Ammoniated Floor Finish Stripper - Green, All Strip 5 Gallon Pail
Non-ammoniated Floor Finish Stripper
Formulated to remove all metal interlocked finishes.
A concentrated non-ammoniated stripper. Special chemical combination quickly unlocks metallic cross-linked polymer, copolymer, and acrylic finishes. Removes all wax and polymer* floor finishes.

Safe - for use on all floors not harmed by water.
Effective - for use in hot or cold, hard or soft water.
Concentrated - fast acting, very effective in penetrating, dissolving, and lifting floor finish/wax film for easy removal.
Pleasant - No offensive ammonia odour that could interrupt or interfere with other work.
Versatile - concentrated for outstanding performance as a low-sudsing detergent in automatic floor scrubbers. Also may be used with pressure sprayers and steam cleaners in industrial applications. NOT AN ALL PURPOSE CLEANER because of its aggressive cleaning abilities.

Total Stripping: Heavy build-up: 1 part strippe rto 3 parts water (42 fl.oz. per gallon water).
Total Stripping: Medium build-up:1 part stripper to6parts water (22 fl.oz. per gallon water).
Surface stripping: Top Scrub: 1 part stripper to 20 parts water (6fl.oz. per gallon water).
PROCEDURE: Apply solution liberally by mop or automatic scrubber. Use hot water when available. Allow solution to stand for 5 to 10 minutes. Next, scrub thoroughly with a floor machine and stripping pad. Pick up dissolved finish solution with mop or wet-vac. Rinse thoroughly with clear water to remove alkaline residue. Allow floor to dry completely.
IMPORTANT: Failure of floor finish can be caused by poor rinsing after stripping.
Spot Cleaning (where floor machine cannot reach - for spot cleaning heavy deposits in small areas like door frames, cabinets, stools and counters): 1 part stripper to 1 part water. Apply, let stand 5 minutes. Remove, then rinse with clear water. Allow to dry.
Other uses: In automatic floor scrubbers for industrial use, a dilution of 1:20 (6 fl. oz. per gallon of water) is recommended for average floor soils. Adjust for heavier or lighter soil conditions.
For use in pressure sprayers or steam cleaners, use above dilutions.

May be harmful if swallowed. May cause irritation to eyes and skin. Keep out of reach of children.

Cleaning & Sanitizing Products for Office Buildings, Hospitals, and Industrial Facilities